H-Block marker float 3Dpecheur | LARGE | Priming marker | HBM2

Description

🎣 H-Block 3Dpecheur marker - Locator float

Size: LARGE - 115 mm x 105 mm
Also available in SMALL model, here

Automatically adjusts to the right depth: simply drop the sinker under the H-BLOCK 3Dpecheur, and the line unwinds until the weight hits the bottom.
Result: your marker is always set to the exact depth, without any additional handling.

---

🌊 Buoyancy - What you need to know

You may be wondering whether this printed model floats properly.
Many off-the-shelf models sinks in less than 30 minutes... a tiny hole is enough (the comments on the sites bear witness to this...).

There is one inescapable principle:
👉 All floating objects must be varnished, painted or coated before being thrown into the water.

This applies to both commercial and 3D printed models.

---

🛠️ Finishing after printing (essential for waterproofing)

To ensure the perfect buoyancy of your H-Block 3Dpecheur :

• Apply varnish to seal print micro-spaces.
• This improves sealing, hardens the surface and guarantees durability.
• Recommendation: 3 coats acrylic varnish (matt or gloss).
• A small can of varnish costs less than €3, and application is fast.

---

🧪 Print test protocol

All the H-Blocks shown in photos or videos were printed on a
ENDER 3 PRO, simply equipped with a BLTouch and a PEI plate.

This proves :

1. The template is perfectly printable.
2. Suitable for the vast majority of FDM printers, even the simplest.

If printing is excellent on an Ender 3, it will also be excellent on your machine.

---

🎯 Designed for real fishing conditions

These models are :

• Specifically designed for FDM printing
• Designed to meet the needs of demanding anglers
• Printed and tested several times under real-life conditions
• Optimized for reliable performance

This isn't just a 3D file - it's proven fishing equipment on the water's edge.