Name: Y-hose connector diameter 20mm (3/4 inch) | 3-way liquid hose joiner| Y001-20
Brand: Apiobi
SKU: 501
Price: 2.75 EUR
Availability: InStock

Y-hose connector diameter 20mm (3/4 inch) | 3-way liquid hose joiner| Y001-20

Grooved Y-fitting for abutting, repairing and joining pipes with an internal diameter of 20mm.

🆔 Design No 501

⚙︎ Formats : STL

𐊵 Version : 1.0

⦸ No AI - No virus

✏︎ Designer : M@t - apiobi

🗓 Published on February 28, 2026

⊙ Views : 443

💬 Exchanges : 0

2,75 €

Premium quality
Low prices direct from the designer
Secure payments

Description

Raccord cannelé en « Y » diamètre 20mm imprimable en 3D pour faire la jonction entre les tuyaux souples de 3/4 pouce (20 mm) de diamètre interne.
Perfectly suited to gardening, ponds, watering systems and water systems for motorhomes, caravans, vans, etc.

The fitting has been completely redesigned for 3D printing.
The walls are at least 1.8 mm thick, allowing the use of a 0.6 mm nozzle and the minimum 3 coats required to prevent leakage.
Les modèles photographiés ont été imprimés en PETG, avec une buse de 0,6 mm et une qualité de 0,20 mm.
A 0.4 mm nozzle is also perfect for printing this fitting.
This fitting is not suitable for high-pressure applications.

Technical Tips for 3D Printing

PETG preferred, ABS or ASA
Type of adhesion: border, min. 5 mm if printing vertically (recommended, see photo)
Filling: 100 %, a must.

Advice:
If you plan to print accessories that come into contact with foodstuffs, don't use conventional filaments. Invest in a technical filament “FDA compliant for food contact”, not much more expensive but absolutely essential.